TRENCHLESS SEWER REPAIR SERVICES
Your broken or failed sewer line does not mean you need to excavate anymore. We can repair your sewer line without the need for excavation. In most cases, a new sewer line can be installed within the old line without any disruption to your driveway, yard, road, sidewalk or landscaping. If you suspect a failed sewer line or have roots in your line please contact us. We can perform a sewer video inspection to see if you are a good candidate for our trenchless repair system. We are your Trenchless Pipelining & Sewer Repair Experts! Book a service call.
HOW TRENCHLESS PIPELINING WORKS - THIS CURED IN PLACE PIPE REPAIR SYSTEM IS STRONGER THAN YOUR ORIGINAL HOST PIPE
TELEVISE THE PIPELINE:
Pipeline is inspected with camera to find problem.
CLEAN THE PIPELINE:
Pipeline must then be cleaned out to remove roots, dirt, debris and any potential objects that could disrupt lining.
Measurements of the pipelines diameter, depth and length are taken. The liner and calibration tube is then cut on the job site according to acquired measurements.
MIX & MEASURE RESIN:
Resin is also measured and mixed according to the acquired measurements
POUR INTO LINER:
The resin is then poured into the liner and rolled or " wet out" many times to ensure complete impregnation of resin to liner
LOAD INTO INVERTER:
Impregnated liner and calibration tube is then loaded into the inverter
INSERT INTO EXISTING PIPELINE:
The liner is then inserted into the existing pipe using directional hoses and inversion heads. These ensure proper insertion
INVERT WITH AIR PRESSURE:
Air pressure then inverts inside out allowing resin to bond and seal with existing host pipe. The calibration tube acts as a ballon to keep the liner in place as it cures
READY FOR SERVICE:
Once cured, the calibration tube is removed and the pipe is ready for service